Description
Description: - For automotive, marine, boats, and much more applications - Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant - 12V DC, 50A, SPST (single pole, single throw) - Contacts are pure copper for long life - Screw terminals are brass, nickel plated - Recommended mounting hole: 0.625" (5/8") - Maximum panel thickness: 0.500" (1/2") without boot; 0.312" (5/16") with boot - CAUTION: Disconnect negative battery cable before installation - Life: = >10000 Times Presses (Factory Tested. Minimum press test > 10000 times) Feature: Brand new and high quanlity. Push-to-make = SPST Momentary A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch. Material: Diecast Aluminum & Plastic Length: 6.2cm Width: 2.8cm Color: Black Voltage: 12V NOTE: It is manual measurement, there may be 2-5mm error. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same, hope understand. Packaging included: 1x Start Button