Description
12V air diesel heater LCD display switch control, controller board main board, remote control, connecting harness Important Note: If your original motherboard and controller look the same as ours, all white plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. Specification: Color: white and black Remote distance: about 30m Voltage: 12V LCD Connector pin: 3 Pins Remote Control: 4 Button LCD Switch:5 Button Fitment: For 5KW Air Diesel Parking Heater Package Included: 1 x Remote Control Or 1 x LCD Switch Or 1 x Mother Board (Note: Please select the parts you need !!!) remote control code-matching operation In shutdown state,simultaneous long press ''on/off''button and''right''button for two seconds,enter remote control code as follows: ''OC 1'' 1)Press ''left'' button or''right'' button to adjust the third digit value for remote control coding,the numerical range is 1-5,corresponding five remote controls. 2)Choose the Code of Remote Controller,arbitrarily press a key of the remote control,Machine Coding Successfully and Exit Coding State. 3)Short press ''set'' button to exit remote control code. *Remote Control Requirements:433 mhz,24-bit code. Note: There is a transparent plastic protective film on the screen that can be removed before using.