-40%
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops
Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops

Automatic STOP & GO Circuit Module unit Kit for HO/N Scale Train Station Stops

$ 12.68

  • Brand: Unbranded
  • Color: Black
  • Control: 9 V DC or Power pack
  • Control System: Analog
  • Country/Region of Manufacture: China
  • Features: Limited Edition
  • Gauge: HO & N
  • MPN: Does Not Apply
  • Material: Electronics
  • Power Type: DC
  • Rail System: Two-Rail System
  • Scale: 1:87
  • Track Type: Two-Rail System
  • Type: Track
  • UPC: Does not apply
  • Vintage: No
  • Year Manufactured: 2021
  • gtin13: Does not apply

Description

Automatic Stop and Go Module Kit for DC, HO and scale Station Stops With this small inexpensive circuit board kit you can set up a small single track oval or circle layout that runs automatically with an adjustable stop time from 1 to 60 seconds. This setup is most commonly used to simulate a station stop. After a pause the train continues to repeat the process. Ideal for a Christmas Tree train setup. Two setup options are given with the instructions. One involves using a block section of track where the locomotive is stopped and a second setup simply turns power off to the entire track during the stop time. If using for N scale please include a NOTE with your order for additional information. The Kit consists of 1) Fully assembled Automatic STOP and GO Circuit Board 2) 1 x Reed switch that is set in between the rails to detect the train 3) 2 x Neodymium magnet discs for your locomotives to activate the reed switch. 4) 1 x 9 Volt Battery Power Pack to power the board with switch for ON/OFF. Use a 9 Volt Alkaline Battery or rechargeable battery. 5) Complete instructions on how to install the system are included and in color at the website. Notes : Works only with DC operation, not DCC. Soldering may be required for connections to the track. Connection wires 26 or 28 AWG are recommended Does not include the battery (a standard Alkaline 9 Volt), train or track Not for children under 12, ( magnets are harmful if swallowed ) Now available from a USA distributor - modeltrainsounds.com BUY IT NOW $24 plus $5 First Class USPS Shipping and Handling in the USA .