Description
The resin 1:1 mix ratio by volume , 1 Gallon kit is volume 1 Gallon mixed, is the total volume 1 Gallon kit : 64oz resin A + 64oz hardener B (Total 1 Gallon) package weight : 10lbs Features : Mix Ratio...............1:1 by volume Work time ..............45-60 minutes Hardness....................D70-80 after full cure Mixed Viscosity..........2500-3500cps. Chemical Resistance.......excellent Moisture Resistance........excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don't leave hot pans on it,a coaster needed) Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2" /3CM), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs. Tips for operation This product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2" to avoid bursting. and you can go as deep as you like, just make sure to work in stages. stay under 1.2" per pour. after the surface film cures begin your second pour. the surface set time is roughly 1 hour at room temp. the full cure time is 8-12 hours in summer and 12-24 hours in winter Operation steps 1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder) Pour into the mixing cup Along the cup wall and bottom stir it evenly for 1-2 minutes Add glitter or pigmentand if you need Slowly pour mixed resindown the mold Add other decorative Important This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.
