Description
Categories NFC Wireless Audio Receiver Bluetooth 5.2 0 udio Adapter with 3.5mm & 2 RCA Port Description Features: 1. Automatically turn on when you turn on the power, so it is very good to use in the car, otherwise you want it to have an automatic function. 2. Dual device connection: pair your smartphone and tablet at the same time through any stereo system that supports standard 3.5mm or RCA jacks, and stream music from anyone. Connect two Bluetooth devices at the same time to listen to music, make calls, etc. 3. Connect two devices: support the simultaneous connection of 3.5mm audio interface and 2 RCA audio interfaces. 4. Hands-free call & navigation transmission: built-in microphone for hands-free call; a simple answer/redial/end/reject button. In addition, the vikefon Bluetooth car adapter supports sending voice notifications from existing navigation applications, so you don’t need to look down at your phone to ensure driving safety. 5. Wireless music streaming: Stream stereo music to non-Bluetooth headphones and speakers. 6. Space-saving design: ultra-compact and light, convenient to use with various equipment. 7. Ultra stable connection: Our Bluetooth audio adapter is equipped with a Bluetooth 5.0 chip, which can achieve continuous pairing, fast transmission and wide signal range (33 feet). With 3.5mm aux interface and 2 rca interfaces, it can be connected to non-Bluetooth car audio system, home audio, wired headset/speaker, power amplifier/home theater, etc. So you can enjoy wireless high-fidelity music streaming! Note: It is just a vikefon Bluetooth receiver, not a transmitter. So you can't use it for your TV, keyboard, mouse. 8. Automatic connection: When you turn on the Bluetooth receiver next time, it will automatically connect to the last paired Bluetooth device. 9.3 key: Next song/turn up the volume, previous song/turn down the volume, multi-function button (MFB) 10: Update to support U disk playback. 11. Note: It is not a built-in battery, so it is powered by USB charging. Product specifications: Product model: BLS-B21 Support equipment: support two mobile phones to connect Bluetooth version: 5.0 Output interface: 3.5mm stereo RCA left and right channels Function introduction: U disk, hands-free call, NFC connection Bluetooth protocol: AVRCP, A2DP Frequency range: 2400-2483.5MHz Frequency response: 20Hz-20kHz Output power: 28mW RL=16Ω Signal to noise ratio: "90dB Total harmonic distortion: "0.1% Support SBC, AAC Forward transmission distance: 10 meters Support Micro USB interface 5V power supply Product size 78*50*18 (mm) Bare metal weight: 32g Package weight: 100g Packing size: 135*94*25mm Packing list: 1*Bluetooth 5.2 audio receiver adapter 1 *3.5mm auxiliary line 1 * User Manual 1 * USB charging cable 1*2rca audio cable NFC Wireless Audio Receiver Bluetooth 5.2 0 udio Adapter with 3.5mm & 2 RCA Port Description Features: 1. Automatically turn on when you turn on the power, so it is very good to use in the car, otherwise you want it to have an automatic function. 2. Dual device connection: pair your smartphone and tablet at the same time through any stereo system that supports standard 3.5mm or RCA jacks, and stream music from anyone. Connect two Bluetooth devices at the same time to listen to music, make calls, etc. 3. Connect two devices: support the simultaneous connection of 3.5mm audio interface and 2 RCA audio interfaces. 4. Hands-free call & navigation transmission: built-in microphone for hands-free call; a simple answer/redial/end/reject button. In addition, the vikefon Bluetooth car adapter supports sending voice notifications from existing navigation applications, so you don’t need to look down at your phone to ensure driving safety. 5. Wireless music streaming: Stream stereo music to non-Bluetooth headphones and speakers. 6. Space-saving design: ultra-compact and light, convenient to use with various equipment. 7. Ultra stable connection: Our Bluetooth audio adapter is equipped with a Bluetooth 5.0 chip, which can achieve continuous pairing, fast transmission and wide signal range (33 feet). With 3.5mm aux interface and 2 rca interfaces, it can be connected to non-Bluetooth car audio system, home audio, wired headset/speaker, power amplifier/home theater, etc. So you can enjoy wireless high-fidelity music streaming! Note: It is just a vikefon Bluetooth receiver, not a transmitter. So you can't use it for your TV, keyboard, mouse. 8. Automatic connection: When you turn on the Bluetooth receiver next time, it will automatically connect to the last paired Bluetooth device. 9.3 key: Next song/turn up the volume, previous song/turn down the volume, multi-function button (MFB) 10: Update to support U disk playback. 11. Note: It is not a built-in battery, so it is powered by USB charging. Product specifications: Product model: BLS-B21 Support equipment: support two mobile phones to connect Bluetooth version: 5.0 Output interface: 3.5mm stereo RCA left and right channels Function introduction: U disk, hands-free call, NFC connection Bluetooth protocol: AVRCP, A2DP Frequency range: 2400-2483.5MHz Frequency response: 20Hz-20kHz Output power: 28mW RL=16Ω Signal to noise ratio: "90dB Total harmonic distortion: "0.1% Support SBC, AAC Forward transmission distance: 10 meters Support Micro USB interface 5V power supply Product size 78*50*18 (mm) Bare metal weight: 32g Package weight: 100g Packing size: 135*94*25mm Packing list: 1*Bluetooth 5.2 audio receiver adapter 1 *3.5mm auxiliary line 1 * User Manual 1 * USB charging cable 1*2rca audio cable
